| Model 2400 General-Purpose SourceMeter w/ Measurements up to 200V and 1A, 20W Power Output | |||||||||||||||||||
| Part Number: 2400 | |||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
- Five instruments in one (IV Source, IVR Measure)
- Seven models: 20 - 100W DC, 1000W pulsed, 1100V to 1«V, 10A to 10pA
- Source and sink (4-quadrant) operation
- 0.012% basic measure accuracy with 5½-digit resolution
- 2-, 4-, and 6-wire remote V-source and measure sensing
- 1700 readings/second at 4½ digits via GPIB
- Pass/Fail comparator for fast sorting/binning
- Available high speed sense lead contact check function
- Programmable DIO port for automation/handler/prober control (except Model 2401)
- Standard SCPI GPIB, RS-232, and Keithley Trigger Link interfaces
- Keithley LabTracer 2.0 I-V curve tracing application software (download)
- I/V Curve Tracing With the Series 2600 SourceMeters and LabTracer Software
- ACS Basic Edition Demonstrations: Solar Cell Test
- Automated Characterization System - Basic Edition Product Demonstration
- Nanotechnology Online Product Tour: Research to Production
- Make low resistance measurements using the Model 2400 SourceMeter (Registered TradeMark) Instrument and Model 2182A nano voltmeter
- 2400 Series - The Difference Between Real and Range Compliance
- 2400 Series - How To Use Saved Setups
- 2400 Series - How To Setup GPIB/RS-232 Communication
- 2400 Series - How To Setup A Fast Voltage Pulse
- 2400 Series - How To Restore Factory Defaults
- 2400 Series - How To Find The Serial # and Firmware Revision
- 2400 Series - How To Enable/Disable Source Autoclear
- 2400 Series - How To Enable/Disable the Beeper
- 2400 Series - How To Configure the Limits
- 2400 Series - How to Configure Output-off Modes
- Series 2400 - How to Configure Local/Remote Sense
- Model 2400 SourceMeter How-To Source 10V with 10 mA Compliance
- Model 2400 SourceMeter How-To Source 1 mA
- Model 2400 SourceMeter How-To Source 10 Volts
- Model 2400 SourceMeter How-To Set Manual or Auto Ohms Mode
- Model 2400 SourceMeter How-To Configure a Linear Voltage Sweep
- Model 2400 SourceMeter How-To Enable / Disable the Interlock
- Model 2400 SourceMeter How-To Configure a Custom/List Sweep
